How To Change Front Brakes

Before doing the other side you may want to press the brake pedal a few times to fill up the brake lines again. Then slide the brake pads out from the caliper.

How To Change Brake Pads On Ford Focus 2003 Yourself Not Sealed

Slide in the new brake pads.

How to change front brakes. Pivot the caliper up. Stuff I used in todays videoPads Rotors. By pressing the brakes the fluid level will go.

This moves the caliper piston forward and forces the brake pads against the rotor. Chances are it will be higher than when you began because your brake pistons are all pushed in requiring less fluid to activate the calipers. Remove the slider bolt.

Steps for changing your brake pads. 34 Replace brake line bracket. 12 mm Socket 35 Repeat all previous steps on other side.

Remember to change out the metal tabs that sit between the brake pad and the caliper mounting bracket. Since you just got done pressing the brake piston back in a fair amount of brake fluid has now backed up into the brake fluid reservoir. Remove the wheels where youre replacing the brake pads front or rear.

How to Replace Front Brakes Pads and Rotors - YouTube. Step 2 - Remove the Guide Pin Bolt Use one spanner to hold the guide pin and unscrew and remove the guide pin bolt. These tabs allow the.

Insert a pry bar through the grooves and free the brake pads from the caliper. Slide out the old brake pads. If playback doesnt begin shortly try.

37 Put your tires back on and lower the vehicle safely. Replace the retaining clips. 36 Once you are done check brake fluid level.

But one of the things that might be recommended is brake caliper replacement. When the brake pedal is applied the fluid is pushed into the brake caliper on each wheel. Most of the time a brake service will require nothing more than brake pads and rotors.

Step 3 - Remove the Brake Pads.

When To Replace Your Car S Brake Pads